Axis 5550 User Manual page 86

Updating the Firmware
Upgrading using FTP
Caution!
86
7. If you do not have a default password, just click Next >. If some of your servers
use a different User ID or Password than the default entries, they will be
displayed in the Remaining servers list. Enter the User ID and Password for
each individual server. Click Next >.
8. Name the upgrade job. This is optional, so you can leave the field blank if
you want. Click the Start button to start the upgrading job.
9. You can view the progress of the job in the Event Log.
Refer to "Using AXIS ThinWizard for Print Server Management" on page
92, for more information about AXIS ThinWizard.
To upgrade over the network using FTP you will need a file with the new
print server firmware. The name of this file is in the form
.
product_version.bin
Ensure that FTP Enabled is set to yes. To check this parameter, browse to
the print server and select Admin | Network Settings | Detailed View |
TCP/IP Network.
Be careful not to interrupt the file transfer. If the transfer is interrupted, the print server may
have to be re-initialized by your dealer.
The objective of this example is to upgrade a print server to firmware
version 7.00.
The description from a typical Windows session uses the following
examples:
• Print server model: AXIS 5550
• IP address of print server: 10.13.4.105
• New firmware version name: 5550_v2_7_00.bin
• Location of firmware and upgrade procedure: c:\Axis
AXIS 5500 / AXIS 5550 User's Manual