Axis 5550 User Manual page 105

How to Print from
Windows NT:
Adding an IPP Printer
to your Printer List in
Windows NT
AXIS 5500 / AXIS 5550 User's Manual
Before you print to an IPP printer you will need to know:
• the address of the print server. The address contains the IP address or
host name of the print server and the printer port name.
• the brand and type of the printer in order to install the appropriate
printer driver.
1. First you need to select the IPP printer to which you want to send your
document. Select the destination printer from your Printer Name list (in
File | Print | Printer Setup).
The printer name will begin with a URL: http://...
If your destination printer does not exist in your Printer Name list,
you need to add it. Adding an IPP printer to your printer list is
described below.
2. When you press Print, the print job is sent over the Internet/WAN to the AXIS
5500/AXIS 5550, which then forwards the print job to the destination
printer.
3. The recipient of the print job can collect the print job at the destination
printer.
1. Install the Internet Printer Connection software from Hewlett Packard
(can be downloaded from the Hewlett Packard Web site) on your
computer.
2. Open Start | Settings | Printers.
3. Choose Add Printer. The Add Printer Wizard will start.
4. Next, the Wizard will ask you if you want to install on My Computer or on
a Network print server. Choose My Computer and click Next.
Configuration Possibilities
105