Advertisement
Table of Contents
SAFELY OPERATING YOUR
Circe Wall Bed
Remove back cushions from sofa and
1
store aside.
With a finger, pull out the bottom of one of
2
the legs located in the space between the
front panel and the structure of the bed. Lift
up the leg about 30 degrees to release the
safety latch.
Do not attempt to close the bed without
releasing the safety latch.
too far in error, pull down on the safety latch
above the leg to release.
Grasp either one of the legs to pull the
3
bed down.
Make sure to support the bed frame for
the entire descent until both legs are
resting on the floor.
NOTE: The Circe will then be safely locked in
place in the open position.
Release the two mattress straps by squeezing
4
the center of the clasp.
Tuck the straps under the mattress.
See you in the morning!
5
Do not attempt to close the bed without releasing the safety latch.
See reverse for instructions on releasing the safety latch.
If you lift the leg
ResourceFurniture.com
Advertisement
Table of Contents
Related Manuals for Resource Circe Wall Bed
Summary of Contents for Resource Circe Wall Bed
- Page 1 SAFELY OPERATING YOUR Circe Wall Bed Remove back cushions from sofa and store aside. With a finger, pull out the bottom of one of the legs located in the space between the front panel and the structure of the bed. Lift up the leg about 30 degrees to release the safety latch.
- Page 2 SAFELY OPERATING YOUR CIRCE WALL BED Do not attempt to close the bed without releasing the safety latch. Remove bed pillows and tuck bedding in on all sides around and under the mattress. Latch both mattress straps over the bedding.
Need help?
Do you have a question about the Circe Wall Bed and is the answer not in the manual?
Questions and answers