Symbols Used; Correct Use; Scope Of Delivery - GEM 8253 Iinstallation, Operating And Maintenance Instructions

2.3

Symbols used

Hand:
indicates general information and
recommendations.
Bullet point:
indicates the tasks to be
G
performed.
Arrow:
®
indicates the response(s) to tasks.
Enumeration sign

3

Correct use

DANGER
Danger of explosion!
® Danger of severe injury or death!
Use in explosion endangered areas
G
is only permissible when using an
individually certifi ed solenoid coil
(option).
Observe the special documentation for
G
use in explosion endangered areas.
WARNING
Use the solenoid valve only for the
intended purpose!
® Otherwise the manufacturer liability and
guarantee will be void.
Solenoid valves to be used exclusively
G
within permissible limits and in
consideration of these installation,
operating and maintenance
instructions. Any other use is to be
considered not as intended.
The solenoid valve may only be used in
G
potentially explosive zones confi rmed
in the declaration of conformity (ATEX).
The solenoid valves must
only be used for the control of media

which have no negative impact on the
physical and chemical properties of the
body and seal material,
only be used providing the product

technical criteria are complied with (see
chapter 5 "Technical data" and the details
in the data sheet),
not be modifi ed from a constructional

point of view.
4

Scope of delivery

The following is included in the scope of
delivery:
Solenoid valve with solenoid coil

Plug

Installation, operating and maintenance

instructions
19/32
8253