Door Panel - Sub-Zero DEU2450R Design Manual

Door Panel

Stainless Steel Panel
Stainless steel panels are available through an authorized
Sub-Zero dealer. Stainless steel panels include a stainless
steel kickplate cover. The outdoor model requires the use
of a Sub-Zero stainless steel outdoor accessory panel. For
local dealer information, visit the find a showroom section
of our website, subzero.com.
Minimum 1/8" reveals are required.
(3)
Custom Panel
For Designer Series Undercounter models, a custom door
panel and handle hardware must be provided. Refer to the
following charts for panel requirements and dimensions.
Do not install a solid panel on the glass door unit. A solid
door is available as a sales accessory through an autho-
rized Sub-Zero dealer.
The panel cannot exceed the maximum panel weight indi-
cated in the chart below. The depth of each model is 23 1/8"
. Allow for panel thickness when planning the finished
(587)
opening depth.
CAUTION
As reveals between cabinetry and the unit decrease,
severe finger pinching can occur while the door is
closing.
Finish all sides of the custom panel. They may be visible
when the door is open or through the glass of glass door
models.
A D-style handle is recommended. Locate the door handle
near the edge of the panel opposite the hinge and cen-
tered top to bottom. Stainless steel tubular and pro handles
are available through an authorized Sub-Zero dealer. For
local dealer information, visit the find a showroom section
of our website, subzero.com.
PANEL REQUIREMENTS
Panel Weight
Panel Thickness
22 lb max
(10 kg)
5/8" min–3/4" max
(16) (19)
subzero.com | 7