Montreux
16521xx0
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Hole size in mounting surface
valves
transfer valve
pull rod
Max. depth of mounting surface
Flow rate
Cartridge with high temperature limit stop
*Please know and follow all applicable local plumbing codes when setting
the temperature on the water heater.
4
Installation Considerations
14.7 - 72.5 psi
•
147 psi
120° - 140° F*
165° F*
•
1½"
1¼"
min. ⅜"
1 ⁹⁄₁₆"
•
2.2 gpm
•
•
Montreux
16522xx0
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thorough-
ly before beginning installation. Make sure
that you have all tools and supplies needed
to complete the installation.
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
This unit requires ½" hot and cold supply
lines (not included).
This unit is for use on a bidet with a vertical
spray.