Accumulation Acceptable Condition Setting 2 - Excell H3 Series User Manual

EXCELL PRECISION CO., LTD.
3-1-12
Press
MC
Enter parameter 00 ~ 02
according to demand
Press to save the
MC
setting data
Default setting:
⇒ Only when the weight returns to zero, the scale accepts the next accumulation
data. If the weight is close to zero band, the scale can be adjusted by
⇒ It's no need to return to zero and the scale can accept the next accumulation
data. That means when there is load, the weight can be accumulated
continuously.
⇒ The weight must return to zero (gross = 0), and the scale can accept the next
accumulation data.
⇒ Press M+ key not to accumulate the data, at the same time, RS232 would be
transmit the LCD data.
03004034

Accumulation Acceptable Condition Setting 2

45
Previous setting
key ⇒ ⇒ ⇒ ⇒ Exit
CE key ⇒ ⇒ ⇒ ⇒ Move the cursor leftward
TARE key ⇒ ⇒ ⇒ ⇒ Move the cursor rightward
MC key ⇒ ⇒ ⇒ ⇒ Enter
ZSME200000051