Additional Safety Warnings - Haussmann 59595062 Operator's Manual

additional SafetY WarninGS

1. use the tool only for dry sanding/sawing/cutting. Water
entering the tool increases the risk of an electric shock.
2. Pay attention that no persons are put at risk through sparking.
Remove any combustible materials in the vicinity. Sparking occurs
when sanding metal materials.
3. caution, fire hazard! avoid overheating the object being
sanded as well as the sander.
4. always empty the dust box before taking breaks. In unfavorable
conditions, e.g., when sparks emit from sanding metals, sanding
debris in the dust box, micro filter or paper sack (or in the filter sack
or filter of the vacuum cleaner) can self-ignite. Particularly when
mixed with remainders of varnish, polyurethane or other chemical
materials and when the sanding debris is hot after long periods of
working.
5. When working with the tool, always hold it firmly with both
hands and provide for a secure stance. The power tool is guided
more securely with both hands.
6. Secure the work piece. a work piece clamped with clamping
devices or in a vice is held more secure than by hand.
7. Keep your workplace clean. Blends of materials are particularly
dangerous. Dust from light alloys can burn or explode.
8. never use the tool if its power cord is damaged. Do not touch
the damaged cord; turn tool off and pull the plug when the cord is
found damaged while working. Damaged cords increase the risk of
an electric shock.
9. Wear protective gloves when replacing a an attachment in the
tool. Attachments heat up with prolonged use.
10. Keep your hands away from the area of the blade. Do not grip
the underside of the workpiece. Contact with the saw blade may
result in injury.
11. use a suitable detector to locate concealed supply cables/
pipes or contact your local public utilities services providers.
Contact with electricity cables can lead to fire or electric shock.
Damaging a gas pipe can lead to an explosion. Penetration of a
water pipe can lead to property damage or to electric shock.
12. if you use the device outdoors, always connect it through a
residual current device (rcd) with a maximum trip current
of 30 ma. If using with an extension cord, always use one that is
approved for outdoor use.
13. noxious fumes! any harmful /noxious dusts generated from
sanding represent a risk to the health of the person operating
the tool and to anyone near the work area.
14. ensure that there is adequate ventilation when working
on plastic, paint, varnish and other potentially hazardous
materials.
15. 15 do not soak the materials or the surface you are about to
work on with liquids containing solvents.
5