Advertisement
Available languages
Available languages
6.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
7.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
Battery tool use and care
1.
Recharge your tool's battery only with the charger
specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a
risk of fire when used with another battery pack.
2.
Use power tools only with their specifically
designated battery packs. The use of any other
battery packs may create a risk of injury and fire.
3.
When battery pack is not in use, keep it away
from metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, which
can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
4.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
Service
1.
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
ADDITIONAL SAFETY WARNINGS
1.
Specific safety rules
Do not let comfort or familiarity with your tool replace
strict adherence to cordless drill safety rules. If you
use this power tool unsafely or incorrectly, you can
suffer serious personal injury.
1)
Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring. Contact with a "live"
wire will make exposed metal parts of the tool "live"
and shock the operator.
2)
Be aware that this tool is always in an operating
condition, because it does not have to be plugged
into an electrical outlet.
3)
Always be sure you have a firm footing.
4)
Be sure no one is below you when using the tool
in high locations.
5)
Hold the tool firmly with both hands.
6)
Keep hands away from rotating parts.
7)
Do not leave the tool running. Operate the tool
only when hand-held.
8)
Do not touch the bit or the work piece immediately
after operation; they may be extremely hot and
could burn your skin.
9)
Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
2.
Important safety instructions for charger and
battery pack
1)
Before using the charger, read all instructions and
cautionary markings on the charger and battery pack
as well as the instructions on using the battery pack.
2)
Only charge your batteries indoors as the charger is
designed for indoor use only.
3)
DANGER. If the battery pack is cracked or damaged
in any other way, do not insert it in the charger. There
is a danger of electric shock or electrocution.
4) WARNING. Do not allow any liquid to come into contact
with the charger. There is a danger of electric shock.
5)
To allow the battery pack to cool down after charging,
do not place it in a hot environment such as a metal
shed or open trailer left in the sun.
6)
The charger is not intended for any use other than
charging the exact type of rechargeable battery pack
as supplied with the charger. Any other use may result
in the risk of fire, electric shock or electrocution.
7)
The charger and battery pack supplied with it are
specifically designed to work together. Do not attempt
to charge the battery pack with any other charger than
the one supplied.
14
Advertisement
