Haussmann 59595062 Operator's Manual page 10

materials, etc., check for foreign objects such as nails, screws,or similar.
If required, remove foreign objects or use or higher quality saw blades.
Work with low and uniform application pressure, otherwise, the tool can
become blocked or cause damage.
3.SandinG
1. Sanding accessories are suitable for dry sanding of wood, metal,
smaller surfaces corners and edges and hard to reach areas.
2. Profiles and grooves may be finished using the tip or edge of the
selected accessory, which should occasionally be rotated during use to
distribute the wear on the accessory and backing pad surface.
3. Always be certain that smaller work pieces are securely fastened to a
bench or other support.Larger panels may be held in place by hand on
a bench or sawhorses.
4 With the work piece firmly secured, turn tool on as described above.
5. Move the tool in long steady strokes parallelto the grain using some
lateral motion to overlap the strokes by as much as 75%. DO NOT apply
excessive pressure - let the tool do the work.
Excessive pressure will result in poor handling, vibration, and unwanted
sanding marks.
9