Hdd Connector - AVERATEC 6100A User Manual

6.
Remove the metal case.
7.
tighten 4 "B" Screws. Note the green PC board of the hard disk
drive is facing against the metal case.
8.
9.
58

HDD Connector

Locate and remove 4 "B" Screws from the HDD module.
Screw B x2
Screw B x2
Re-attach the metal cover to the new hard drive and
Re-attach the HDD module to the HDD connector.
Put the HDD cover back and re-attach Screw A.