1. Manuals
  2. Brands
  3. AVERATEC Manuals
  4. Laptop
  5. 6100A
  6. User manual

AVERATEC 6100A User Manual

Averatec 6100a: user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

6100A User's Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6100A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AVERATEC 6100A

Summary of Contents for AVERATEC 6100A

  • Page 1 6100A User’s Manual...
  • Page 2 Notice The information in this user’s manual is subject to change without notice. THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR ERRORS OR OMISSIONS CONTAINED IN THIS MANUAL AND SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES, WHICH MAY RESULT FROM THE PERFORMANCE OR USE OF THIS MANUAL.
  • Page 3 TABLE OF CONTENTS PREFACE Symbols and Conventions Protecting Your Computer - Avoid Abusive Handling and Adverse Environment Chapter Summaries GETTING TO KNOW THE BASICS Performance Features System at a Glance Top View Front and Rear Views Side Views Bottom View AC Adapter LED Status Indicators Keyboard Features...
  • Page 4 Modifying the BIOS Settings Main Setup Advance Setup Boot Setup Security Setup Power Setup Exit Setup BATTERY POWER & POWER MANAGEMENT The Battery Pack Lithium-Ion Battery Technology Battery Low-Power Warning Installing and Removing the Battery Pack Charging the Battery and Charging Time Checking the Battery Level Prolonging the Battery’s Life and Usage Cycles Using Windows Power Options...
  • Page 5 Network Adapter / Ethernet Problems PC Card / PCMCIA Problems Performance Problems FireWire (IEEE1394) and USB2.0 Problems APPENDIX A Product Specification APPENDIX B Agency Regulatory Notices...

  • Page 6: Using This Manual

    Preface Using This Manual This User’s Manual contains general information about the hardware and software setup, troubleshooting, and technical specifications of the notebook computer. Symbols and Conventions The following conventions and symbols are used in this manual: When keys are to be pressed at the same time, a plus (+) symbol is used.
  • Page 7 Protecting Your Computer - Avoid Abusive Handling and Adverse Environment Following the advice below will help ensure that you get the most out of your Investment. Your computer will serve you well if you take good care of it. Do not expose the computer to direct sunlight or place it near sources of heat.
  • Page 8 Keep the adapter away from children. The total ampere ratings of the equipment plugged in should not exceed the ampere rating of the cord if you are using an extension cord. The total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating.

  • Page 9: Chapter Summaries

    Chapter Summaries The following is a summary of the available chapters and appendices in this manual. Chapter 1: Getting to Know the Basics In this chapter, you will learn the basic operations and features of your computer. It gives you a general understanding of the components of your computer.

  • Page 10: Getting To Know The Basics

    GETTING TO KNOW THE BASICS This chapter introduces the features and components of the computer.

  • Page 11: Performance Features

    Performance Features n High Performance Processor The notebook PC is equipped with the powerful Mobile AMD Sempron processor which has advanced power management features and high bus bandwidths throughput. n Advanced Graphic Engine The Integrated Ultra256 video processor gives excellent graphic performance.

  • Page 12: Wireless Lan

    n FireWire (IEEE1394 / 1394a) and USB 2.0 ports In addition to a full array of built-in I/O por offers IEEE1394 for ultra high-speed connection to high bandwidth digital video devices and USB 2.0 ports for high speed USB peripherals. n Wireless LAN The integrated Wireless LAN module allows your notebook to connect wirelessly to other 802.11-enabled systems,...

  • Page 13: System At A Glance

    System At A Glance Top View 11 10 9 LCD Latch The LCD latches lock / unlock the LCD panel.
  • Page 14 2. Built-in Microphone The built-in microphone records sound. 3. LCD Display The panel is where the visual output is displayed. 4. Built-in Stereo Speakers The built-in speakers output the sound in stereo. In certain models, the speakers are located in the lower section of the display panel.
  • Page 15 off the system. How this key behaves can be defined in [Start > Settings > Control Panel > Power Options > Advanced] menu. Press the power / suspend button again to return from the suspend mode. (See Chapter 3 for more details on system suspend function.) Note: When the system power is initially turned on, the Scroll-lock,...
  • Page 16 Front and Rear Views Warning: Do not place any heavy objects on the top of notebook. This may damage the display. 1. External VGA Port The 15-pin VGA analog port is for connecting an external monitor or projector. 2. Battery Pack The battery pack is a built-in power source for the notebook.
  • Page 17 6. Audio Line-in Jack The Audio Line-in jack (3.5-mm diameter) is where you connect an external audio input source such as a CD Player. 7. Stereo Headphone / SPDIF-out Jack The stereo headphone jack (3.5-mm diameter) is where you connect the headphones or external speakers. Alternatively, you may connect the SPDIF output to an external DTS, AC3, or PCM sound processor / decoder in your home stereo system.
  • Page 18 Side Views Warning: Do not place any heavy objects on the top of notebook. This may damage the display. 1. Ethernet / LAN Port The port connects to a network hub via the RJ-45 cable and also conforms to the 10/100Base-TX transmission protocol. 2.
  • Page 19 4. PC Card Slot (Type II PCMCIA) and Card Eject Button The slot is where you insert a Type II PC Card. Press the eject button to release the PC Card. Note: For safety consideration, please insert the PCMCIA dummy card when not using the PCMCIA card.
  • Page 20 Bottom View 1. Battery Pack and Battery Latch The battery pack is a built-in power source for the notebook. Slide the battery latch to release the battery pack.
  • Page 21 2. USB Device Cover Underneath the cover, there is a USB connector. This connector is reserved for future use. 3. Hard Disk Drive Cover The system’s hard disk drive is located under the cover. The HDD can be upgraded to a larger capacity. (See Chapter 4 for instructions on upgrading the HDD.) 4.
  • Page 22 AC Adapter DC-out Connector The DC-out connector docks to the power jack (DC-in) on the computer. 2. Adapter The adapter converts alternating current into constant DC voltage for the computer. 3. AC Plug The AC plug plugs to the AC wall outlet. Warning: Make sure you are using a standard 3-prong AC wall socket with a ground pin.

  • Page 23: Led Status Indicator

    LED Status Indicator The LED Status Indicator displays the operating status of your notebook. When a certain function is enabled, an LED will light up. The following section describes its indication. System & Power Status Indicators LED Graphic Symbol Note: When the system power is initially turned on, the Scroll-lock, Cap-lock, and Numeric keypad LED indicators will light up momentarily to indicate the start of the Power-On sequence.

  • Page 24: Keyboard Features

    Keyboard Features Function Keys (Quick Keys) Graphic Symbol For various system controls, press the Fn (Function) key and the Fx key simultaneously. Action System Control Fn + F1 Enters Suspend Mode. Fn + F3 Turns of the battery warning beep off or on. Fn + F4 Changes Display Mode: LCD-only, CRT-only and...
  • Page 25 Windows Keys Your keyboard also has two Windows keys: 1. Start Key This key allows you to pull up the Windows Start Menu at the bottom of the taskbar. 2. Application Menu Key This key brings up the popup menu for the application, similar to a click of the right mouse button.

  • Page 26: Touch Pad

    Touch Pad The built-in touch pad, which is a PS/2-compatible pointing device, senses movement on its surface. As you move your fingertip on the surface of the pad, the cursor responds accordingly. The following items teach you how to use the touch pad: 1.

  • Page 27: Graphic Subsystem

    Graphic Subsystem Your computer uses a high performance 15.4” active matrix TFT panel with high resolution and multi-million colors for comfortable viewing. The integrated Ultra256 video graphics accelerator, which is Microsoft DirectX 8.1 compatible, performs quick graphic renderings. Adjusting the Display Brightness The notebook uses special key combinations, called hot keys, to control brightness.
  • Page 28 Opening and Closing the Display Panel To open the display, push the LCD latch inwardly and lift up the lid. Then tilt it to a comfortable viewing position. To close the display cover, fold it down gently until the LCD latches click into place.

  • Page 29: Audio Subsystem

    Audio Subsystem Your computer’s audio subsystem is Sound Blaster Pro-compatible. Adjusting the Volume Manually To increase the volume, press Fn+F5. To decrease the volume, press Fn+F6. Adjusting the Audio Volume in Windows 1. Click the speaker symbol in the task tray in Windows. 2.
  • Page 30 Modem Your computer comes with a 56K V.92 internal fax/modem and a phone jack (RJ-11), which is located on the left side of your computer. Use a telephone cable to connect the computer to the telephone wall outlet. Connecting the Modem 1.
  • Page 31 Ethernet Your computer is equipped with a 10/100Base-TX Fast Ethernet network adapter. Connect the active LAN cable to the RJ-45 LAN port located on the left side of the computer. This allows you to access and transmit data in the local area network. Connecting to the Network Use Unshielded Twisted Pair (UTP) Ethernet cable only.

  • Page 32: Bios Setup And Security Feature

    BIOS SETUP AND SECURITY FEATURE In this chapter, you will learn how to enter the BIOS Setup Menu and manipulate various hardware control settings. You will also learn how to use the built-in security features.
  • Page 33 Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/Output System). It runs and maintains a variety of hardware functions. It is a menu-driven software, which allows you to easily configure and change the settings. The BIOS contains manufacture’s default settings for the computer’s standard operations.

  • Page 34: Entering The Bios Setup Screen

    Entering the BIOS Setup Screen First turn on the power. When the BIOS performs the POST (Power-On Self Test), press F2 key quickly to activate the AMI BIOS Setup Utility. Note: You may need to press F2 key fairly quickly. Once the system begins to load Windows, you may have to retry by cycle-power on again Leaving the BIOS Setup Screen When you have finished modifying the BIOS settings, exit the BIOS.

  • Page 35: Modifying The Bios Settings

    Modifying the BIOS Settings The AMIBIOS setup main menu is subdivided into sub-menus. Each menu item is described in this section. Main Setup Under this menu, you may change time/date and view basic processor and system memory information. Item Selections / Sub-menu Date Time...

  • Page 36: Boot Setup

    This shortens the boot-up time. [Disabled]: The system performs full tests while booting. When Enabled, the system will display the AVERATEC logo instead of the POST messages. When Disabled, the system will display POST messages (i.e. devices information.) [On]: The numeric keypad on the keyboard is enabled on boot.

  • Page 37: Boot Device Priority

    ? Boot Device Priority Item Selections / Sub-menu Removable Dev. 1st Boot Intel UNDI, PXE-2 Device Hard Drive CD/DVD 2nd Boot Device Note: If you select Intel UNDI, PXE-2, the system will attempt to boot from the network. Note: When the BIOS performs POST, you may also press F12 Key to enable the Boot Device selection menu.

  • Page 38: Security Setup

    Security Setup ? Boot Settings Configuration Item Selections / Sub-menu Change Supervisor Password Change User Password Clear User Password Boot Disabled Sector Enabled Virus Protection Note: About Boot Sector Virus Protection: If enabled, the following warning message appears when a program attempts to alter the boot sector.
  • Page 39 The passwords activate two different levels of protection: 1. System always asks for password every time it is powered on. 2. System asks for password only when you attempt to enter BIOS utility. The passwords are encrypted and stored in NVRAM. Make sure you write them down or memorize them.

  • Page 40: Power Setup

    Power Setup Item Selections / Sub-menu On/Off Power Button Mode Suspend Enabled Silent Mode Button Disabled Note: The Suspend Mode selection in BIOS only applies to older Windows version (such as Windows 3.1 or Windows 95 or NT4) or non-Windows operating system. In Windows ME / 98SE / 2000 / XP, suspend mode and settings are determined by settings in the Power Options Properties (Start >...

  • Page 41: Exit Setup

    Exit Setup Item Selections / Sub-menu Saves Changes and Exit Discard Changes and Exit Load Optimal Defaults Description After you have completed the BIOS settings, select this item to save all settings, exit BIOS Setup utility, and reboot. New system settings will take effect on next power-up.
  • Page 42 C H A P T E R BATTERY POWER & POWER MANAGEMENT In this chapter, you will learn the fundamentals of power management and how to use it to achieve longer battery life. T H R E E...

  • Page 43: The Battery Pack

    this chapter, you will learn how to operate your notebook on battery power, how to handle and maintain the battery pack, and learn about the system’s power saving features. The LCD, processor and hard disk drive are the major hardware subsystems that consume the most power.

  • Page 44: Battery Low-Power Warning

    Battery Low-Power Warning Low battery condition occurs when battery power is reduced to 6%. The red battery status LED indicator blinks and the system beeps once every 16 seconds or Very Low battery condition occurs at 3 % power remaining. The red battery status LED indicator blinks and the system beeps at 4-second interval.

  • Page 45: Installing And Removing The Battery Pack

    Installing and Removing the Battery Pack To Remove the Battery Pack: Place the notebook bottom-side up on a flat and secured surface. Push the latch and pull the battery’s hard case away from the notebook.

  • Page 46: To Install The Battery Pack

    To Install the Battery Pack: secured surface. compartment of the notebook. Charging the Battery and Charging Time To charge the battery, while the battery pack is in the notebook, plug the AC adapter into the notebook and an electrical outlet. The charging time is approximately 4-6 hours when the notebook is turned off and approximately 8-12 hours when the notebook is turned on.

  • Page 47: Checking The Battery Level

    Checking the Battery Level You can check the remaining battery power in the Windows battery status indicator, which is located at the lower right-hand corner of the task bar. (If you do not see a battery or AC-in icon on the task tray, go to Power Options Properties box and click on the Advanced tab.

  • Page 48: Using Windows Power Options

    Using Windows Power Options Windows Power Management provides basic power saving features. In the Windows Power Options Properties [Start > Settings > Control Panel > Power Options] dialogue box, you may enter time-out values for display and hard disk drive. Windows power manager saves power by turning off hard drive after 1 minute of inactivity, for example.
  • Page 49 In this dialog box, you can manually set the LCD and hard drive’s time-out values in the Plugged in column and in the Running on batteries column. Lower time-out values will save more battery power. Note: Also consult Windows user guide for more information on how to use Windows power management functions.

  • Page 50: Suspend Mode

    Suspend Mode Standby Suspend The system automatically enters this mode after a period of inactivity, which is set in the Power Schemes dialog box. In Standby mode, hardware devices, such as display panel and hard disk, are turned off to conserve energy.
  • Page 51 Note: Do not install, remove or change the memory module when the system is in the suspend or hibernate mode. Note: Actual dialogue box shown above may appear slightly different.

  • Page 52: Power Button Action

    Power Button Action The notebook PC’s power button can be set to turn off the system or activate the suspend mode. Go to [Start > Settings > Control Panel > Power Options] and click on the Advanced tab. In the pull-down menu, select how you wish the power button to work as.

  • Page 53: Low Battery Warning

    Low Battery Warning You can define when and how the system warns you of its battery-low condition. Go to the Alarms tab in the Power Options Properties box. If you wish to hear audible beeps, click on the Alarm Action button and put a check on Sound Alarm. Note: Consult Windows user guide for more information on how to use Windows power management functions.
  • Page 54 Power Menu Quick Access Instead of making specific selections in the Power Options Properties box, you can quickly and easily specify which pre-set power saving function you desire by clicking on the Battery icon at the lower right-hand corner of the task bar. (If you do not see a battery or AC-in icon, go to Power Options Properties box and click on the Advanced tab.

  • Page 55: Upgrading Your Computer

    C H A P T E R F O U R UPGRADING YOUR COMPUTER In this chapter, you will learn how to upgrade the DRAM and hard disk drive.

  • Page 56: Upgrading The Hard Disk Drive

    NOT covered by the manufacturer’s warranty. Upgrading your hard drive may result in discontinued technical support coverage of your product. Consult AVERATEC Customer Care before upgrading your HDD. Warning: Apply care when handling the hard disk.
  • Page 57 Upgrading the Hard Disk Drive To replace the hard disk drive, do the following: Turn OFF the computer. Unhook the AC cord and all cables/devices attached to the notebook. Remove the battery back. Place your hand on a large metal object momentarily to discharge any static electricity.

  • Page 58: Hdd Connector

    HDD Connector Locate and remove 4 “B” Screws from the HDD module. Remove the metal case. Re-attach the metal cover to the new hard drive and tighten 4 “B” Screws. Note the green PC board of the hard disk drive is facing against the metal case. Re-attach the HDD module to the HDD connector.
  • Page 59 Congratulations! You have now completed the hard drive upgrade. When you boot up the PC, you will need to create a primary HDD partition and reformat the new drive and install an operating system, drivers and all necessary applications.

  • Page 60: Upgrading The System Memory

    Upgrading the System Memory Many applications will generally run faster when the computer’s dynamic memory capacity is increased. The computer provides two DDR memory sockets, located underneath the System Device Cover. You can increase the amount of memory by replacing the existing small-outline dual inline memory modules (commonly known as SO-DIMM) with higher capacity SO-DIMMs.

  • Page 61: Installing A Memory Module (Dimm) Into The System

    Installing a memory module (DIMM) into the system To install the DIMM, do the following: Turn OFF the computer. Unhook the AC cord and all cables/devices attached to the notebook. Remove the battery back. Place your hand on a large metal object momentarily to discharge any static electricity.
  • Page 62 If you need to remove an old DIMM from the socket, press out on the latches located on both edges of the socket at the same time. The DIMM should pop up to an angle of 30 degree (see diagram below). Pull the DIMM module out of the memory socket.
  • Page 63 Pivot the DIMM until the latches on both sides of the socket snap into place. Note: Notice the notch on the DIMM. The notches should fit nicely with the socket. Put the System Device Cover back and tighten 6 “C” Screws.

  • Page 64: Troubleshooting

    CHAPTER? FIVE TROUBLE SHOOTING In this chapter, you will learn how to solve common hardware and software problems.
  • Page 65 Your computer has been fully tested and complies with the system specifications before shipping. However, incorrect operations and/or mishandling may cause problems. This chapter provides a reference for identifying and correcting common hardware and software problems that you may encounter. When you encounter a problem, you should first try to go through the recommendations in this chapter.
  • Page 66 cause the system to misbehave. If you are not sure of the changes you made, try to restore all the settings to factory defaults. Be sure all the device drivers are installed properly. For example, without the audio driver properly installed, the speakers and microphone will not work.

  • Page 67: Audio Problems

    Audio Problems No speaker output - Turn up the volume dial located at the right edge of the computer. See Chapter 1 for its location. Software volume control is turned down in Microsoft Sound System or is muted. Double-click the speaker icon on the lower right corner of the taskbar to see if the speaker has been muted or turned down all the way.

  • Page 68: Hard Disk Problems

    Hard Disk Problems The hard disk drive does not work or is not recognizable - If you had just performed a hard disk upgrade, make sure the hard drive connector is not loose and the hard disk drive is also correctly seated. Remove it and reinsert it firmly, and restart your PC.
  • Page 69 for instructions on decreasing the cache size or on removing temporary Internet files. Empty the Recycle Bin to create more disk space. When you delete files, Windows saves them to the Recycle Bin. The hard disk takes longer to read a file - If you have been using the drive for a period, the files may be fragmented.

  • Page 70: Optical Drive Problems

    Optical Drive Problems The optical drive does not work - Try rebooting the system. The disk is damaged or files are not readable. After you have inserted a CD-ROM disk, it may take a moment before you can access its content. The drive does not read any disks - The CD may not be properly seated in the tray.

  • Page 71: Display Problems

    Display Problems The display panel is blank when the system is turned on - Make sure the computer is not in the Standby or Hibernate suspend modes. The display is turned off to conserve energy in these modes. The screen is difficult to read - The display resolution should be set to 1280x800 for optimal viewing.

  • Page 72: Keyboard And Mouse Problems

    Keyboard and Mouse Problems The built-in touch pad performs erratically - Make sure there is no excess perspiration or humidity on your hand when using the touch pad. Keep the surface of the touch pad clean and dry. Do not rest your palm or wrist on the surface of the touch pad while typing or using the touch pad.

  • Page 73: Cmos Battery Problem

    CMOS Battery Problem A message “CMOS Checksum Failure” displays during the booting process or the time (clock) resets when booting - Try to reboot the system. If the message “CMOS Checksum Failure” appears during the booting procedure even after rebooting, it may indicate failure of the CMOS battery.

  • Page 74: Memory Problems

    Memory Problems The POST does not show an increased memory capacity when you have already installed additional memory - Certain brands of memory module may not be compatible with your system. You should ask your vendor for a list of compatible DIMM. The memory module may not be installed properly.

  • Page 75: Modem Problems

    Modem Problems The built-in modem does not respond - Make sure the modem driver is loaded properly. Go to [Start > Settings > Control Panel > Phone and Modem Options] and go to Modems tab. Make sure a 56K Voice Modem is listed. Otherwise, click the Add button to add the modem driver.

  • Page 76: Network Adapter / Ethernet Problems

    Network Adapter / Ethernet Problems The Ethernet adapter does not work - Go to [Start > Settings > Control Panel > System > Hardware > Device Manager]. Double-click on Network Adapters and check if a Fast Ethernet NIC appears as one of the adapters.

  • Page 77: Pc Card (Pcmcia) Problems

    PC Card / PCMCIA Problems Note: Some system may not have the PC Card Slot option. PC Cards do not function- Make sure you have properly installed the driver for the card. Consult the card’s manual or contact the vendor for trouble-shooting.

  • Page 78: Performance Problems

    Performance Problems The computer becomes hot - In a 95 back case are expected to reach 50 Make sure the air vents are not blocked. If the fan does not seem to be working at high temperature (122 degrees Fahrenheit and higher), contact the service center.

  • Page 79: Firewire (Ieee1394) And Usb 2.0 Problems

    FireWire (IEEE1394) and USB 2.0 Problems The USB device does not work - Windows NT 4.0 does not support USB protocols Check the settings in the Windows Control Panel. Make sure you have installed the necessary device drivers. Contact the USB peripheral vendor for additional support. The IEEE1394 port does not work - Go to [Start >...

  • Page 80: Product Specification

    PRODUCT SPECIFICATION...

  • Page 81: System Memory

    n Processor Mobile AMD Sempron, 2600+ to 3100+ n Memory Type DDR SDRAM 333 / 400, PC2700 / PC3200 compatible 128 / 256 / 512MB, 2.5-Volt, 64-bit bus n Default Two 200-pin DIMM sockets, Max 1 GB n Memory Expansion n LCD Panel 15.4-inch (1280x800) WXGA TFT display n Graphic...

  • Page 82: Lan / Ethernet

    n Audio Codec DirectSound 3D, EAX 1.0 & 2.0 compatible n Sound A3D, I3DL2 compatible Capabilities AC97 V2.2 compatible 2 Stereo Speakers n Transmission AC97 V2.2 Modem support Rate V.92 / V.90 / K56flex for download data speed up to 56Kbps.

  • Page 83: Keyboard & Touch Pad

    n Capabilities IEEE1394 OHCI Host Controller and Up to 400 Mbps Expandable up to 63 devices n Hard Drive 2.5-inch format hard disk drive n DVD R/ RW 5.25-inch format (12.7mm height) fixed module n Keyboard 86-key QWERTY keyboard with embedded numeric keypad and Windows keys, 19mm Pitch n Touch pad Built-in Touch Pad...

  • Page 84: Ports And Connectors

    n Mic-In Port One Microphone-in jack n Audio-Out / SPDIF One Headphone / SPDIF jack n Audio-in Port One Line-in jack n FireWire One FireWire (IEEE1394) host connector n USB2.0 Port Three USB 2.0-compliant connectors n Ethernet One standard network Ethernet connector (RJ-45) n Modem One modem / phone connector (RJ11) n S-Video...

  • Page 85: Physical Specification

    n PnP Function Plug and Play BIOS n Self Test Power On Self Test n Auto DRAM auto-detection, auto-sizing Detection L2 Cache auto-detection Hard disk type auto-detection n Power APM 1.2 (Advanced Power Management) & Management ACPI 2.0 (Advanced Configuration Power Interface) n Security Two Level Password Protections n Other...

  • Page 86: Agency Regulatory Notices

    AGENCY REGULATORY NOTICES...
  • Page 87 Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 88: Connections To Peripheral Devices

    example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. The final end product must be labeled in a visible area with the FCC ID. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the Manufacture...

  • Page 89: Canadian Notice

    IEC61000-4-11:2001 EN50082 (IEC801-2, IEC801-3, IEC801-4) Electro-magnetic Immunity EN 300 328-2, EN 300 328-1, EN 301 489-1, EN 301 489-17 (ETSI 300 328, ETSI 301 489) Electro-magnetic Compatibility and Radio Spectrum Matter. TBR21 ( ETSI TBR21) Terminal Equipment. EN60950 (IEC950) I.T.E. Product Safety Canadian Notice This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference...

  • Page 90: Other Countries

    The cord set must have a current capacity of at least 10 A and a nominal voltage rating of 125 / 250 VAC. CAUTION: MODEL 6100A IS DESIGNED FOR USE WITH THE FLLOWING AC ADAPTER MODEL ONLY Manufacture: LI SHIN INTERNATIONAL ENTERPRISE CORP.

  • Page 91: Battery Pack Safety

    Telephone lines requirement The appropriate utilization of 26AWG telephone line cord on unit. CAUTION: Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. CAUTION: To reduce the risk of fire, use only No. 26AWG or larger telecommunication line cord.

  • Page 92: Laser Safety

    Laser Safety The optical drive used with this computer is certified as a Class 1 laser device according to the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard and International Standards IEC 825 / IEC 825-1 (EN60825 / EN60825-1). The device is not considered harmful, but the following precautions are recommended: Do not open the unit.
  • Page 93 Zum Netzanschlua dieses Gerates ist eine geprufte Leitung zu verwenden. Fur einen Nennstrom bis 6A und einem Gerategewicht groBer 3kg ist eine Leitung nicht leichter als (1)H05VV-F, 3G, 0.75mm conductors einzusetzen. Die Steckdose muB nahe dem Gerat angebracht und leicht zuganglich sein.

Table of Contents