Wahl 4437 Operating Manual page 12

E N G L I S H
General user information
Information about using the operating manual
f Before using the appliance for the first time, you must read and
understand the operating manual completely.
f Consider the operating manual as part of the product and store it in
a safe and accessible place.
f This operating manual is also available in PDF format from our ser-
vice centres. The EC declaration of conformity can also be requested
de
in other official EU languages from our service centres.
f Include this operating manual if passing the appliance on to a
third party.
en
Explanation of symbols and notes
fr
The following symbols and signal words are used in this operating
it
manual, on the appliance or on the packaging.
PROHIBITED
es
This symbol prohibits the use of the appliance near bathtubs,
showers, washbasins and other water-filled containers.
pt
DANGER
nl
Danger of electric shock which may result in serious physical
injury or death.
da
DANGER
sv
Danger of explosion which may result in serious physical
injury or death.
no
DANGER
fi
Danger due to the use of flammable materials. Danger of
fire development which may result in serious physical injury
tr
or death.
WARNING
pl
Warning of possible physical injury or a health risk.
cs
CAUTION
Information about danger of material damage.
sk
Note with useful information and tips.
hr
Action to be taken by owner.
f
hu
Carry out these actions in the sequence described.
1.
sl
2.
3.
ro
bg
ru
uk
et
lv
lt
el
12
ar
Product description
Description of parts (Fig. 1)
A Cool tip
B Conic heating element
C Base stand
D LCD display
E On/off switch
F Button to increase temperature
G Button to reduce temperature
H Handle
I Mains cable with anti-twist protection
Technical data
Operating voltage: 100 – 240 V AC / 50/60 Hz
Power consumption: 45 – 50 W
Dimensions (L x Ø): 340 x 39 mm
Weight: 150 g without mains cable
Operating conditions
Ambient temperature: 0 °C – +40 °C
The appliance is safety insulated and radio screened. It meets the
requirements of EU Electromagnetic Compatibility Directive 2014/30/EU
and Low Voltage Directive 2014/35/EU.
Operation
Preparation
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power supply.
f Only operate the curling tong with the voltage stated on
the nameplate.
Operation
1. Unfold the base stand and place the curling tong on a flat, smooth,
non-heat-sensitive surface.
2. Insert the mains plug into the socket.
3. Switch on the curling tong using the on/off switch (Fig. 2).
4. Select the desired temperature (80 °C – 210 °C).
·
To increase the temperature, press the p button.
·
To reduce the temperature, press the q button.
·
The preset temperature is 180 °C.
·
Tapping can adjust the temperature in 5°C steps. To
adjust the temperature more quickly, hold down the
appropriate button.
·
The LCD display flashes three times when the tempera-
ture is set. Once the set operating temperature has been
reached, the LCD display shows the temperature.
5. After using the curling tong, switch them off using the on/off
switch (Fig. 2). The LCD display goes out.
6. Disconnect from the mains.
7. Allow the curling tong to cool down.