Table of Contents
Advertisement
SNMP Errors
The following are default messages displayed when an SNMP error
occurs. Usually they are overridden by an explanation. If the field causing
the problem is known, it is also reported.
Avaya M-MLS Routing Manager User Guide
Table A-1. Error Messages and Explanations
Communication to the
device failed. Message
might have been lost.
The route you entered is
invalid.
The ARP Table Timeout
value you entered is
invalid.
The ARP Table entry is
invalid.
You may not update an
existing Redundancy
definition. Delete the entry
and create a new one.
Invalid Circuit Number.
You must specify a name
for the server.
The interface's address and
the Main Router Address
must be different.
You can't add an interface
named X.
Authentication key must
by X or less characters.
SNMP Error Message
The following error has occurred:
SNMP Error: Message too big.
The following error has occurred:
SNMP Error: No such name.
General information message that is displayed
when the SNMP communications layer fails to
communicate with the device.
Displayed in the Routing Table window when
an invalid route is entered.
Displayed when the ARP table timeout selected
is either too big or too small.
Displayed when an invalid ARP entry is entered.
Displayed in the IP Redundancy window when
trying to change the parameters of an existing
redundancy.
Displayed in any of the IPX windows when an
invalid circuit number is entered.
Displayed in the IPX Services window when no
name is entered for the server.
Displayed when trying to enter an interface
address which is identical to the address of the
Main Router.
Displayed when trying to enter the 'Generic'
VLAN name, which is not allowed.
Displayed when an authentication key is
entered that is longer than X characters.
Table A-2. SNMP Errors
Explanation
Standard SNMP error.
Standard SNMP error.
Error Messages
71
Advertisement
Table of Contents
