Rip Interfaces - Avaya M-MLS User Manual

RIP Interfaces

To define and display the RIP interfaces, click the
RIP Interfaces
The following parameters are displayed:
Avaya M-MLS Routing Manager User Guide
. The RIP Interfaces window appears.
Figure 4-8. RIP Interfaces Window
Table 4-8. RIP Interface Parameters
Field Name
IP Address
Send Mode
Interface State
Status - Enable
Description
The IP address of the interface.
What the device sends on this interface. Values are:
• SendAll - RIP updates contain the entire
routing table.
• DoNotSend - No RIP updates are sent.
• SendDefaultOnly - RIP updates contain only
a single entry. This advertises the router as the
default router.
The operational status of the RIP interface - active
or inactive.
The administrative status of the RIP interface -
enabled or disabled.
IP Route
IP Route folder and select
31