Nutricia FLOCARE INFINITY Short Manual

FLOCARE INFINITY PUMP
SHORT MANUAL
Preparing and setting up the pump
1 1
Open the pump
door by pressing
gently up on the
lower wall (A) and
rotating the door
upwards (B) at the
same time.
Operating instructions
Clearing pump
memory and priming
the feeding set
1 1
Continuous
feeding
2 2
Pre-set
dose
AT HOME
2 2
Position the looped
section of the
silicone tubing
around the rotor.
INFO INFO
+ +
400ml/h
ml/h ml/h
– –
1ml/h
+ +
400ml/h
ml/h ml/h
– –
1ml/h
3 3
Stretch slightly
to seat the
cassette into
the pump.
When switching the pump on or off,
ON/OFF ON/OFF
press this key for 2 seconds.
This will clear the previous volume.
CLR CLR
The rate and dose will remain unchanged.
Pressing this key for 2 seconds will
FILL SET FILL SET
automatically fill the feeding set. Connect the
feeding set to the feeding tube and choose
appropriate feeding program
DOSE=VOL DOSE=VOL
DOSE=VOL DOSE=VOL
4 4
Close the pump door
- you should hear a
small click when it is
closed properly. The
pump is now ready to
be switched on.
1 1
CLR CLR START/STOP START/STOP
+ +
4000ml/h
START/STOP START/STOP
– –
1ml/h
or .
2 2