THOMSON Grass Valley Kameleon Series Instruction Manual page 81

KAM-AV and KAM-SD Links and Web Pages
No Embedded Audio
If no embedded audio groups are present in the incoming SDI signal, the
Group Deletion input status section will appear as shown in Figure 48.
Input Status is and Output Status is for each audio group.
Not Present Empty
No deletion or Group Replacement is possible with this status.
Figure 48. No Embedded Audio Present
Pass and Delete Embedded Audio
If an embedded audio group is present in the incoming SDI signal and has
been selected for on the DEMUX web page, the audio group
No Extraction
will be passed to the output as shown in Figure 49. Input Status is
Present
and Output Status is
Passed.
Audio groups present in the incoming SDI stream may also be deleted.
Check the corresponding checkbox to remove an audio group com-
Delete
pletely that is reported as from the SDI stream. The Output Status
Present
will report Deleted .
Figure 49. Pass and Delete Embedded Audio
Kameleon Series Instruction Manual 81