THOMSON Grass Valley Kameleon Series Instruction Manual page 30

Installation
Submodule
Submodule 1
2
A to D A to D
A to D D to A
D to A D to A
D to A A to D
A to D None
None A to D
D to A None
None D to A
None None
1
There may be any number of audio inputs but there is a limit of four output audio pairs with any configuration.
2
Only KAM-AV modules support composite video I/O.
30
Table 8 provides the various audio input and output I/O configurations
and the video outputs for the KAM-AA-MIX-UR rear module. Analog
audio input or output configuration depends on the positioning of the
audio ADC and DAC submodules.
tionship of submodule to rear connector for KAM rear modules.
AES/EBU audio input or output configuration is set by configuring the
connector as an input or output on the I/O Config web page
page 55).
Any number of audio inputs can be configured but there is a limit of four
audio output pairs with any configuration.
Table 8. KAM-AA-MIX-UR I/O Configurations
Video Input
2 dual Analog inputs (J8 and J9)
and 2 dual Analog outputs (J5 and J6)
2
1 SDI or Composite 2 dual Analog outputs (J8 and J9) and
(J10) 2 dual Analog inputs (J5 and J6)
2 dual Analog inputs (J8 and J9)
2 dual Analog inputs (J5 and J6)
2 dual Analog outputs (J8 and j9)
2 dual Analog outputs (J5 and J6)
Figure 5 on page 16
Analog Audio
1
Inputs/Outputs
4 dual Analog inputs
(J5, J6, J8, and J9)
4 dual Analog outputs
(J5, J6, J8, and J9)
None
Kameleon Series Instruction Manual
illustrates the rela-
(Figure 28 on
AES Audio
Video Output
Inputs/Outputs
4 AES/EBU (J3)
unbalanced
streams from break-
2 SDI (J1 and J2),
out cable indepen-
1 Composite (J7)
dently selectable as
inputs or outputs on
I/O Config web page.
2