THOMSON Grass Valley Kameleon Series Instruction Manual page 10

Introduction
10
Standard front processing module functions include:
• 3D video decoding (KAM-AV only),
• Up to 8 channels of audio A/D or D/A conversion (with submod-
ules),
• Video and audio synchronization,
• 8 channels of audio embedding/de-embedding,
• Audio remapping to specific I/O,
• AES/EBU sample rate conversion,
• Video and audio processing amplifiers,
• Video and audio test signal generators,
• Individual Analog and Digital video timing controls, and
• Powerful VBI (vertical blanking interval) processing.
• Six types of rear I/O modules are available:
• KAM-AA-R Analog Audio Rear module,
• KAM-MIX-R Mixed Audio Rear module,
• KAM-AES-R AES Audio Rear module,
• KAM-AA-AES-UR Rear module,
• KAM-AA-MIX-BR Rear module, and
• KAM-AA-MIX-UR Rear module.
• Two audio conversion submodules that can be installed on the pro-
cessing module,
• Four-channel Analog to Digital Conversion Submodule (ADC), and
• Four-channel Digital to Analog Conversion Submodule (DAC).
Note Frame synchronization requires a 2000GEN Genlock Reference Module
installed in the 2000 Series Kameleon Frame.
A front and rear module pair are required. The front processing modules
provide the signal processing power while the rear module determines the
specific I/O connections (refer to
A-to-D and D-to-A converter submodules may be installed in two slots on
either version of the processing module.
Figure 1 on page 11). Separate audio
Kameleon Series Instruction Manual