THOMSON Grass Valley Kameleon Series Instruction Manual page 51

Kameleon Series Instruction Manual
Figure 24 illustrates the KAM-MIX-R Rear module I/O Config web page.
The type of submodule in Position 1 will determine whether Analog Audio
connectors J7-J10 are all inputs or all outputs. Submodule 2 is not used with
this rear module.
Select the type of AES I/O with the
selected AES connectors can be defined as inputs or outputs with the pull-
down controls on this web page.
Refer to Table 3 on page 22
on page 22 for cabling information.
Note Only the selected AES outputs are valid. Unconfigured AES outputs are
invalid and should not be used.
Figure 24. KAM-MIX-R Rear Module Configuration Web Page
KAM-AV and KAM-SD Links and Web Pages
or
Unbalanced Balanced
for submodule I/O combinations and
radio buttons. The
Figure 11
51