THOMSON Grass Valley Kameleon Series Instruction Manual page 26

Installation
Submodule
Submodule 1
2
A to D A to D
A to D D to A
A to D None
None A to D
D to A D to A
D to A A to D
D to A None
None D to A
None None
1
There may be any number of audio inputs but there is a limit of four output audio pairs with any configuration.
2
Only KAM-AV modules support composite video I/O.
3
Analog Audio connector J6 supports only Analog Audio Channels 1 and 2.
26
Table 6 provides the various audio input and output I/O configurations
and the video outputs for the KAM-AA-AES-UR rear module. Analog
audio input or output configuration depends on the positioning of the
audio ADC and DAC submodules.
Any number of audio inputs can be configured but there is a limit of four
audio output pairs with any configuration.
Table 6. KAM-AA-AES -UR I/O Configurations
Video Input
2 dual analog inputs (J8 and J9)
and 1 dual analog output (J6
2 dual analog inputs (J8 and J9)
1 dual analog input (J6
2
1 SDI or Composite
(J10)
2 dual analog outputs (J8 and J9) and
1 dual analog input (J6
2 dual analog outputs (J8 and j9)
1 dual analog output (J6
Analog Audio
1
Inputs/Outputs
3 dual analog inputs
3
(J6 , J8, and J9)
3
)
3
)
selectable as all inputs,
3 dual analog outputs
3
(J6 , J8, and J9)
selectable as inputs or
3
)
3
)
None
Kameleon Series Instruction Manual
AES Audio
Video Output
1
Inputs/Outputs
4 AES/EBU
unbalanced
BNCs J2-J5
1 SDI (J1) and 1
all outputs,
Composite
or independently
outputs on the
I/O Config web page
2
(J7)