THOMSON Grass Valley Kameleon Series Instruction Manual page 120

Software Updating
120
12. Check the
Re-Boot when complete
screen.
13. Click on the
Load
begin the update.
14. If the load has been successful, a popup will appear as shown in
Figure 78. Click the
Figure 78. Load Successful Popup
15. Allow the reboot to complete.
16. Open the Status web page of the module
KAM-AV and Figure 22 on page 48
software version has been updated.
17. Go to the E-MEM web page and select the
factory settings. Verify proper operation of the module.
18. This completes the update. Refer to the latest Kameleon Release Notes
in PDF format for an overview on new functionality for this software
release.
checkbox in the lower left corner of the
button at the bottom of the Load Software screen to
button.
OK
for KAM-SD). Check that the
Kameleon Series Instruction Manual
(Figure 21 on page 47
button to restore
Recall
for