THOMSON Grass Valley Kameleon Series Instruction Manual page 115

Kameleon Series Instruction Manual
•
SNMP Trap Reporting
and/or status of all frame devices such as modules, power supplies,
power and fan sleds and other frame functions such as fan and Frame
Bus status.
• Use the corresponding
ings and alarms should be reported to the SNMP manager for the fol-
lowing conditions:
• Faults
• Devices removed
• Signal Loss
• Reference Loss
• Config Error
The enabled SNMP traps will be reported to any SNMP manager that
is identified as an SNMP Report Destination in 2000NET configuration.
Trap severity is read-only hard-coded information that is interpreted
and responded to by the SNMP Manager software configuration.
Refer to the 2000NET Instruction Manual for complete details on using
the 2000NET web pages.
KAM-AV and KAM-SD Links and Web Pages
– this section provides a table showing the presence
checkboxes to indicate what trap warn-
Report
115