Changing The Default Settings; Understanding The Menu Structure; Using The Menu - AEG DVD 4517 Operation Manual

Understanding the menu
structure
Fig. 19

Using the menu

Fig. 20
Fig. 21
05-DVD 4517 AEG - GB 59

Changing the default settings

A large number of default settings can be comfortably changed via the
screen menu.
Press the SETUP-button (Fig. 2/25) on the remote control to start the
menu for changing the default settings.
NOTE:
Many of these default settings can be changed via both the remote
control and the menu „Default settings". The difference is: If you
change the default settings via the remote control, these changes
will only be valid until the DVD-Player is switched off or the DVD is
changed.
However, any changes made in the menu „Default settings" are
permanent.
The Setup menu has two menu levels:
Main menu: The main level is represented by graphical symbols.
Sub-menu: The corresponding sub-menu options can be found
under each of the main menu options.
Navigation and selection
Use the Cursor Buttons (Fig. 2/14) ( ,
to browse through the main menu.
In contrast to this, you must use the Cursor Buttons ( ,
move in the sub-menu.
Select a menu option with the PLAY-button (Fig. 2/27).
Use the PLAY-button also to select an option (e.g. "PAL" in the il-
lustration on the left). The selected option (in the example „NTSC")
is now highlighted (Fig. 20).
Slide control
In many menus you will fi nd slide controls to adjust e.g. the volume or
the brightness of the screen. The slide control is used as follows:
1. Select with the PLAY-button.
2. Move the control with the Cursor Buttons ( ,
3. Confi rm the entry with the PLAY-button.
Changing the default settings Themen
) on the remote control
).
) to
59
19.01.2006, 10:53:19 Uhr