Speaker Setup; Digital Setup - AEG DVD 4517 Operation Manual

Themen Changing the default settings

Speaker setup

Fig. 38
Fig. 39
Fig. 40
Fig. 41

Digital setup

Fig. 42
64
05-DVD 4517 AEG - GB 64
Downmix
Change the characteristics of the speaker output:
LT/RT: Choose this setting if you want to play the DVD with the Pro
Logic Dolby stereo effect. This produces a almost real 2-channel
replay effect.
Stereo: Choose this setting if you want to play a DVD, that has
been produced in the 5.1-Audio format, as 2-channel stereo sound.
VSS: You may probably not have a 5.1-Audio system. In this case
you can use the „VSS"-setting to simulate a similar sound effect.
OFF: Select this setting to transmit the Audio signal to the output
device without changes.
Subwoofer
ON: Output of subwoofer signal.
OFF: No output of subwoofer signal.
Bass-mode
Here you can defi ne the loudspeaker size.
LARGE SPEAKERS: frequency band 20 Hz - 20 kHz
SMALL SPEAKERS: frequency band 200 Hz - 20 kHz
MIXED SPEAKERS: Choose this setting if, for example, the centre
has a frequency band of 20 Hz - 20 kHz and the other loudspea-
kers a frequency band of 200 Hz - 20 kHz.
Center delay/Rear delay
If you use a 5.1-Audio system, you may experience a distortion of the
sound impression caused by the distance differences between spea-
ker groups and listener. Sounds that should be heard by the listener at
the same time arrive successively.
Here you can delay the output from the central or the rear speakers,
in order to achieve a well balanced sound impression for the listener.
The setting is made in milli-seconds, the maximum delay for the center
speaker („Center Delay") is approx. 4 milli-seconds and for the rear
speakers („Rear Delay") approx. 12 milli-seconds. Consequently this
settings allows to compensate a distance of 1.2 m to the center spea-
ker and of approx. 4.8 m to the rear speakers.
Night mode
Night mode activates a special Audio characteristic with which the
sound is felt less disturbing.
19.01.2006, 10:53:54 Uhr