Changing The Default Settings - AEG DVD 4531 USB/CR Instruction Manual & Guarantee

Understanding
the menu structure
Using the menu
05-DVD 4531 USB-CR_GB.indd 51 05-DVD 4531 USB-CR_GB.indd 51
Start the replay of photos by selecting the fi le from which the replay shall
start ➯ Page 50, „Selecting fi le/directory and starting replay".
Scrolling
Manual: Press the „PREV I " (Fig. 3/5) or „NEXT
3/6) on the remote control to scroll forward or back.
Automatic: Press the „PLAY
automatically.
Rotating a photo
You can use the Cursor buttons to rotate a photo during replay:
Mirror vertically: Cursor Button „ "
Mirror horizontally: Cursor Button „ "
Rotate clockwise for 90°: Cursor Button „ "
Rotate counter-clockwise for 90°: Cursor Button „ "

Changing the default settings

A large number of default settings can be comfortably changed via the screen
menu.
Press the SETUP button (Fig. 3/24) on the remote control to start the
menu for changing the default settings.
NOTE:
Many of these default settings can be changed via both the remote
control and the menu. The diff erence is: If you change the default
settings via the remote control, these changes will only be valid until
the DVD-Player is switched off or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:
Main menu: The main level is shown at the top edge of the screen by
means of generic terms.
Sub-menu: The corresponding sub-menu options can be found under
each of the main menu options.
Navigation and selection
Use the Cursor Buttons (Fig. 3/25) ( / ) on the remote control to
browse through the main menu.
In contrast to this, you must use the Cursor Buttons ( / ) to move
in the sub-menu.
Select a menu option with the ENTER button (Fig. 3/10).
Use the ENTER button also to select an option. The selected option is
now highlighted.
English
I" button (Fig.
" button (Fig. 3/7). The pictures change
51
21.02.2008 9:22:27 Uhr 21.02.2008 9:22:27 Uhr