Table 7-6. Module Allocation Per Zone With Type-1 Frame - Avaya 6424D+M User Manual

Divide the terminations of the distribution cables among the zones in 100-pair increments.
(described earlier in this chapter under Recommended Frames for Terminal Blocks) may be used for a
zoned MDF that is terminating up to 10 modules. Table 7-6, Module Allocation per Zone with Type-1
Frame, shows the number of modules allocated per zone when you design an MDF with a type-1 frame.
Each type-1 frame can accommodate 3000 jumper pairs per side. Figure 7-10, Zone Arrangement of
Type-1 Frame — Plan View, and figure 7-11, Zone Arrangement of Type-1 Frame — Front View, Zone
2. show a type-1 frame used in a zone arrangement.
NOTE: Type-1 frames are not recommended for greater than 10 modules.

TABLE 7-6. Module Allocation per Zone with Type-1 Frame

NOTE: Custom-engineer all installations over 10 modules.
MDF/IDF DESIGN: DEFINITY GENERIC 2 WITH UNIVERSAL MODULES
Number of Number of
Modules Zones
1-5 1
6
2
7 2
2
8
9 2
10
2
Number of
Modules for Zone
1-5
3,3
4,3
4,4
5,4
5,5
7-19