Erase All - Avaya 2410 User Manual

Self Test
The Self Test option, which appears on this screen, verifies the operation of
the 2410 telephone's lamps and display components. It also provides
information regarding the 2410 telephone firmware version and link status.
While the telephone is running in self-test mode, you can continue to make
and receive calls using the dialpad and call-handling buttons as usual.
To have the 2410 telephone perform a self test
1. From the Home screen, press the Option softkey.
The Options screen is displayed.
2. Press the Self Test feature button.
The Self Test screen is displayed.
3. Press and hold the Test softkey to begin the test process.
4. Do one of the following:
• If you want to exit test mode and return to the Options screen, press
the Done softkey.
• If you want to exit test mode and to return to Page 1 of the Home
screen, press

Erase All

The Erase All option on the third Options screen allows you to erase all of the
personalized settings and reset the 2410 telephone to its default settings.
This option erases your customized call appearance/feature button labels
and all entries saved in your Call Log and Speed Dial List.
Note: The contrast level setting is not changed by the Erase All option.
To erase all personalized settings
1. From the Home screen, press the Option softkey.
The Options screen is displayed.
2. Press
Call Log screen appears.
3. Press the Erase softkey.
The Confirm Erase All screen is displayed with a message indicating
that this action cannot be undone.
.
until the Erase Speed Dial List, User Labels, and
or
45