Advertisement
Description of this Upgrade
Step 3. Remove Some Cables (All Models) and Some Bottom Assemblies (Options 405,
420, and 425 Only)
C. Install Some *New* LFE Cables
Reinstall the following LFE cables as shown in
Figure 3 on page
16. The
top-side end of the cables is installed later.
Figure 3
Install the Bottom-side End of the *NEW* LFE Cables (N5240-60112,
N5240-60113)
D. Reinstall Test Set Motherboard
Refer to your Service Guide's "Removing and Replacing the A19 Test Set
Motherboard" section. Reuse the hardware that was set aside.
16
Installation Note N5225-90142
Advertisement
