Page 44
●Do not attempt to change the technical characteristics of the product because it can be dangerous. ●If you should not to use this appliance any more (or replace an old model), before disposing of it, During operation the work surfaces of the make it inoperative in conformity with current cooking area become very hot: keep children law on the protection of health and the...
Page 55
no heating zone has been selected. Be sure to select a heating zone before operating it. There is humidity on the sensors, and/or your fingers are wet. Keep the touch control surface and/or your fingers clean and dry. The locking function is activated.
Page 61
excessive temperature in the electronics or on the glass. Wait for a while for the electronics to cool ensure that the power cable is plugged in. down or remove the pot or pan so that the glass can cool. the container is not appropriate (it does not have a ferromagnetic bottom or is too small).
Need help?
Do you have a question about the JZC Series and is the answer not in the manual?
Questions and answers