Do you have a question about the GK LUX 86 3G AI AL 2TR and is the answer not in the manual?
Questions and answers
Anbu
March 4, 2025
How to change red flame
1 comments:
Mr. Anderson
May 14, 2025
To change the red flame (adjust burner flame) on the Teka GK LUX 86 3G AI AL 2TR:
1. Disconnect the appliance from the electricity main before making any adjustments. 2. Turn the burner knob to the "Reduced rate" position (small flame). 3. Remove the knob. 4. Turn the throttle screw to the right or left to adjust the flame until it is at the desired level. 5. Check that the flame does not go out when switching quickly from "Full on" to "Reduced rate." 6. After adjustment, replace all seals. 7. Only burners operating with Town gas should be adjusted this way.
Summary of Contents for Teka GK LUX 86 3G AI AL 2TR
Page 1
MODEL : www.teka.com - GK LUX 86 3G AI AL 2TR - GK LUX 78 3G AI AL 2TR - GK LUX 73 2G AI AL 2TR - GK LUX 30 2G AI AL...
Page 2
Page1 9. Detail Product Specifications Congratulations on choosing a Teka appliance, which you will find dependable and easy to use. We recommend that you read this manual for best performance and to extend the life of your appliance. Thank you.
Page 3
User Manual User Manual Page2 Page7 2. Product Specifications 7. Is there a problem? 6. How to keep your cooktop in shape It may occur that the cooktop does not function IBefore cleaning or performing maintenance on GK LUX Series or does not function properly.
Page 4
User Manual User Manual Page6 Page3 Using unstable or deformed cookware 5. Practical advice D Liquid Petroleum Gases (LPG) are heavier e The dimensions of the opening for the furniture must be those indicated in the table Trying to install or repair the appliance than air and as a result settle downwards LPG To maintain the EFFICIENCY and SAFETY of below (see Fig.
Page 5
User Manual User Manual Page4 Page5 The placement of the burner For best performance, follow these general Check the seal A. The placement of Triple Ring Once the appliance has been installed make sure guidelines: 1. Place the triple ring burner properly, and the Use the appropriate cookware for each burner all the connections are properly sealed using a must be aimed at the hole of the...
Need help?
Do you have a question about the GK LUX 86 3G AI AL 2TR and is the answer not in the manual?
Questions and answers
How to change red flame
To change the red flame (adjust burner flame) on the Teka GK LUX 86 3G AI AL 2TR:
1. Disconnect the appliance from the electricity main before making any adjustments.
2. Turn the burner knob to the "Reduced rate" position (small flame).
3. Remove the knob.
4. Turn the throttle screw to the right or left to adjust the flame until it is at the desired level.
5. Check that the flame does not go out when switching quickly from "Full on" to "Reduced rate."
6. After adjustment, replace all seals.
7. Only burners operating with Town gas should be adjusted this way.
This answer is automatically generated
Air stuffer located my device