Decorative Edge Panels; Attaching The Depth Adjusting Plate - Avaya M770 User Manual

Multifunction switch
Hide thumbs Also See for M770:
Table of Contents

Advertisement

Chapter 1
Quick Start
Note: You must install the depth-adjusting plates before installing any modules.
To install the plates perform the following steps:
1
When facing the hub, align each plate so that the narrow flange is toward the
rear of the hub, facing out. See Figure 1.1.
2
From inside the hub, screw on the 4 flat-headed screws to secure the plate to the
side of the hub.
Figure 1.1

Decorative Edge Panels

The two plastic side-panels can be removed to allow access to the screw holes.
Simply unclip the panels and replace them. The panels are interchangeable.
2

Attaching the Depth Adjusting Plate

Avaya M770 User's Guide

Advertisement

Table of Contents
loading

Table of Contents