Differential Correction Source; Military Frequency; Airspaces Level; Terrain Legend - AvMap GeoPilot Plus User Manual

Avmap geopilot plus: user manual
Table of Contents

Advertisement

WIDth - the width of the screen is displayed.
Use the cursor key to select and 'ENT' to accept. The default setting is Bar.

14.1.3 Language

Selects the language in which you wish menu information to be displayed (i.e. screen labels, menus
and options). Map detail will remain in English.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENT' + "GENERAL SETUP" 'ENT' +
"LANGUAGE" + 'ENT'
Use the cursor key to select and 'ENT' to accept. The default setting is English.

14.1.4 Military Frequency

The display of Military Frequency data can be set to ON or OFF (this data is found in European
Database cards).
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENT' + "GENERAL SETUP" + 'ENT' + "MILITARY
FREQUENCY" + 'ENTER'
Use the cursor key to select and 'ENT' to accept. The default setting is Off.

14.1.5 Airspaces Level

Sets the Altitude value that conditions the air spaces display if MOVING MAP
MENU -> AIRSPACE SETTINGS -> DISPLAY AIRSPACES is set ABOVE or BELOW.
If DISPLAY AIRSPACES is set ALL , AIRSPACE LEVEL is irrelevant.

14.1.6 terrain Legend

Enables/Disables the legend box in the lower left corner of the display when in the MOVING MAP
MENU any of the TAWS features is selected. one of the R-A-M mounting options.

14.2 FIX SEt-UP

The Fix Setup sub-menu contains options relating to GPS data input and display.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENT' + "FIX SETUP" + 'ENT'

14.2.1 Fix Source

The GEOPILOT uses positioning information provided by the internal GPS-receiver or by an
external NMEA 0183, external Air Data, or External RNAVdata string.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENT' + "FIX SETUP" + 'ENT' + "FIX SOURCE"
+ 'ENT'
Use the cursor key to select and 'ENTER' to accept. When connecting the GEOPILOT to an external
source, be sure the data output of the external device is set for the correct format (see Sec. .5).
The default setting is Internal GPS.

14.2.2 Differential Correction Source

The GEOPILOT can be connected to a DGPS Beacon Receiver that sends RTCM-104 data. To select
the Differential Correction source:
67

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GeoPilot Plus and is the answer not in the manual?

Questions and answers

Table of Contents