Table of Contents
Advertisement
1.4 Before Installation
■
It is very important to locate the LCD Keyboard Drawer in a suitable environment.
■
The surface for placing and fi xing the LCD Keyboard Drawer should be stable and level or mounted into a suitable
cabinet.
■
Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
■
Position LCD Keyboard Drawer with respect to related facilities.
1.5 Unpacking
The LCD keyboard drawer comes with the standard parts shown on the package contents. Check and make sure
they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.6 Optional Accessories
1. USB 2-in-1 KVM cable
1.1 CB-6
6 feet
1.2 CB-10 10 feet
1.3 CB-15 15 feet
2. Extended rear mounting L-bracket
4.1 430mm (16.9") extended rear L-bracket for :
S117 series up to 970mm
S119 series up to 1020mm
*Extended rear L-bracket in tailor-made length on request
3. Power Cord
3.1 IEC power cord
3.2 NEMA 5-15 power cord (US)
3.3 BS 1363 power cord (UK)
3.4 CEE 7/4 power cord (German)
3.5 AS 3112 power cord (Australia)
P.4
Chapter 1
Advertisement
Table of Contents
