Troubleshooting - Toto Washlet TCF4911E Series Instruction Manual

Troubleshooting

First, try the actions described on pages 60 - 67.
If the problem persists, consult the installer, seller, or TOTO customer service
(see contact information on the back cover).
Is the Power LED lit?
Is the Energy saver
LED lit?
Is the remote control
working?
Remote control
transmitter
60
Please check fi rst
■ Is the "Power ON/OFF" setting "OFF"?
Switch it to "ON" with the remote control. (Page 15 Step
■ Is the "Power" LED on the main display fl ashing?
The main unit is not mounted properly.
Mount them correctly again. (Pages 32, 33)
■ Is the breaker on the distribution board turned on?
Check whether there is a power outage or the
breaker has turned "OFF".
■ While the LED is lit, energy saver
toilet seat temperature may be reduced or the heater may be
turned off.
■ Does the display screen on the
back of the remote show "
Replace the batteries. (Pages 14, 56)
■ Is the remote control transmitter or
the remote control receiver blocked?
Remove obstructions, dirt, water
droplets or any other blockages.
{For TCF4911E *** , TCF4911 *** }
Remote control
receiver
CAUTION
If a water leak
occurs, close the
shutoff valve.
Shutoff
valve
2
2
- )
<Power>
is in operation, so the
(Page 26)
"?
The remote control
batteries
uses
to operate.
{For TCF4914E *** , TCF4914 *** }
Remote control
receiver