What To Do; If The Water Does Not Fl Ow Due To A Water Service Interruption; If You Cannot Operate With The Remote Control - Toto Washlet TCF4911E Series Instruction Manual

Hide thumbs Also See for Washlet TCF4911E Series:
Table of Contents

Advertisement

What to Do?

If the water does not fl ow due to a water service interruption

If you cannot operate with the remote control

If the water does not fl ow due to a water service interruption
1
Use a bucket to fl ush water.
If the water level is low after
2
fl ushing, add more water.
• Prevents odors.
Attention!
• Before starting work, set "AUTO FLUSH" to "OFF"
(only when "FLUSH" button is located on the top side of the remote control). (Page 38)
• When the water supply is restored, be sure to perform a full flush.
(To prevent waste from remaining in the drain pipe.)
If you cannot operate with the remote control
■ If the low battery warning mark "
display screen on the back of the remote control
lights up, please replace the batteries.
■ Replacing the batteries
1
Switch the breaker on the distribution board to OFF.
2
Remove the remote control from the hanger.
(Page 14)
Open the battery cover and replace two AA batteries.
3
(Page 14)
• The low battery warning mark goes off.
4
Mount the remote control in the hanger.
5
Switch the breaker on the distribution board to ON.
• The "Power" LED lights up.
Attention!
• "ON" and "OFF" settings of the functions such as the energy saver function may be canceled when the batteries
are replaced.
Set them again.
56
Large bucket
" on the
MENU
1.MANUAL
CLEANING
Pour strongly, aiming
at the center of the
bowl unit.
Newspaper, dustcloth, etc.
1/5
Low battery
warning mark
<Power>

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents