Rohs (Restriction Of Hazardous Substances) - Hilti SID 4­-A22 Manual

Trouble or fault
The power tool
doesn't run.
Running speed sud-
denly drops consid-
erably.
The battery runs
down more quickly
than usual.
The battery doesn't
engage with an audi-
ble double click.
The power tool or
the battery becomes
very warm.
10

RoHS (Restriction of Hazardous Substances)

Click on the link to go to the table of hazardous substances:
qr.hilti.com/r3357052.
There is a link to the RoHS table, in the form of a QR code, at the end of this
document.
11 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
*2145524*
Printed: 20.02.2019 | Doc-Nr: PUB / 5293888 / 000 / 05
Possible cause
The battery is not fully
inserted.
Low battery.
Low battery.
Very low ambient tem-
perature.
The retaining lugs on the
battery are dirty.
Electrical fault.
The tool is overloaded
(application limits ex-
ceeded).
2145524
Action to be taken
▶ Push the battery in
until it engages with
an audible double
click.
▶ Change the battery
and charge the empty
battery.
▶ Change the battery
and charge the empty
battery.
▶ Allow the battery to
warm up slowly to
room temperature.
▶ Clean the retaining
lugs and push the
battery in until it
engages. Contact
Hilti Service if the
problem persists.
▶ Switch the power
tool off immediately,
remove the battery,
keep it under obser-
vation, allow it to cool
down and contact
Hilti Service.
▶ Select a suitable
power tool for the
application.
English 27