Advertisement
Available languages
Available languages
7. Assembly of the net:
Make sure that the groove of the goal is clean and all packing material or other material
is removed so that the assembly is possible without any problems.
Now fix and adjust the net rope in the groove. Then stick net holders with its clips into the
groove and fix them with a 90° rotation. Fixing is either possible manually, with the key for
hexagon socket screws or with a pliers (see bottom pictures). Distribute net holders
equally (same distances).
We recommend the following distribution of net holders:
Size
3,00 x 2,00m
5,00 x 2,00m
7,32 x 2,44m
Use all the other included net holders for corners and other connections.
Pull the tensioning cord through each net meshes and fix it outside on both net hoops,
if necessary lead it through the bore in the net hoop.
Dismantling of the net is also done by rotation of the net holders through 90 degrees.
8. Maintenance and safety instructions:
_________________________________________________________________________
_
Die Urheberrechte von Abbildungen und Texten liegen bei dem Hersteller
Net holders
Total
crossbar
35
13
40
21
55
31
This goal is only constructed for Soccer and not for other
purposes. Check all screwed fastenings before use and repeat it
from time to time.
Do not climb net or goal frame. It is not allowed to fix additional
parts or extensions at the goal frame which may impair the
safety of the goal (according to EN standard 748).
Check screwed fastenings regularly and change damaged and
wearing parts if need be. The unit should be maintained once a year
by skilled personnel.
Note: Due to our continuous quality check of products and equipment
technical modifications are possible.
In order to avoid damages or misuse of the goal keep it upright and
safe when not in use.
Only use water to clean surfaces and no alcohol or aggressive
substances.
uprights
9
9
11
14
Cat.-no.:
1158801
1157808
1150605, 1150504,
1150517
Advertisement
