EARTH GROUND CONNECTION (LIGHTNING PROTECTION)
1. Insert the copper wire from earth ground hardware, and tighten the screw in front.
2. Minimum 10 AWG/5mm
3. Add copper-clad steel ground rods and/or plates sufficient to achieve 10Ω or less resistance at a
minimum 8'/2.5 m away from the controller.
HCC - Power Module Wiring Diagram
Power Module Terminals
1. Green
2. Yellow
3. Yellow
4. White
5. Red
6. Black
7. C
8. P/MV
9. REM
10. White
8. Red
9. Black
2
wire to earth ground hardware.
Copyright 2021 Hunter Industries. All Rights Reserved.
Ground
24 VAC Transformer
24 VAC Transformer
Sensor Common
Rain Sensor
Flow Meter
Common
Pump or Master Valve
Remote Control Input
Sensor Common
Rain Sensor
Flow Meter
6