Hcc - Installing Wi-Fi Antenna Extension Kit - Hunter Hydrawise PRO-C Software/App Owner's Manual

HCC - Installing Wi-Fi Antenna
Extension Kit
To improve Wi-Fi visibility to the router, we recommend using the Wi-Fi extension kit (model: WIFI-
EXT-KIT). This is not a signal booster, but an option to get the antenna closer to the router. Going
around corners, through obstructions, or just reducing the distance are appropriate applications for
this product.
The extension kit comes with two separate cables and mounting hardware to install in ¾" conduit.
The thicker cable provides a 9' extension, while the thinner cable is 3.5' in length.
WIFI-EXT-KIT: Parts Included
Cable 3.5'
Cable 9'
SMA Adapter (red cap)
Conduit Mounting Hardware
Please visit an authorized Hunter distributor near you using our interactive Distributor Lookup
IMPORTANT: Use only one cable extension, as combining the two will incur a signal loss.
Steps
Step 1: Open the front panel to access the antenna
compartment.
Step 2: Remove the three Phillips screws on the left-hand
side of the back of the panel.
Controller Models
Used only for ACC2
cable when using the HCC model.
Used for HCC
Used only for HCC
Used for HCC
Illustrations
Copyright 2021 Hunter Industries. All Rights Reserved.
model controllers. Disregard this
[2]
and ACC2 model controllers.
[3] [2]
model controllers.
[3]
and ACC2 model controllers.
[3] [2]
[1]
11