Hidden Features And Optional Power; Installing The Transformer (Optional) - Hunter XC Hybrid Quick Start Manual

Feature
PROGRAMMABLE
SENSOR OVERRIDE
DELAY BETWEEN
STATIONS
CLIK-DELAY
TOTAL RUN TIME
EASY RETRIEVE®
TOTAL RESET
QUICKCHECK™

INSTALLING THE TRANSFORMER (OPTIONAL)

The XC Hybrid is designed to operate on batteries or a permanent
plug-in transformer, if AC power is available. A 24 VAC output plug-
in transformer can be attached to the two 24 VAC terminals inside
the lower access area.
NOTE: This does not change the DC voltage output from the station
terminals. Existing DC solenoids should remain installed.
Built on Innovation
®
Where Found
Hold – and turn to START TIMES.
Hold – and turn to RUN TIMES.
Hold + and turn to OFF.
Turn to RUN TIMES. Press ◄
when station 1 is shown, PRG to
select other programs.
Hold + and PRG to Save. Hold –
and PRG to Restore.
Hold PRG and press RESET
button.
+, –, ◄, ► together, then +.

Hidden Features and Optional Power

Description
Sets individual stations to ignore sensor shutdowns. Select stations with
◄ or ►, use +/– to change to OFF to ignore sensor.
Inserts a delay (seconds or minutes) between stations in a run time for
slow valves or recharging tanks.
Set number of days for watering to remain off, after sensor has been
activated and restored.
Calculates and displays total of all run times in a program Start Time.
Saves all program information to restore at a later time.
Returns to factory defaults and erases watering schedule and settings.
Checks all stations for wiring problems.
TRANSFORMER MODELS
VOLTAGE IN/OUT
120/24 VAC
230/24 VAC
240/24 VAC
VERSION PART NUMBER
U.S. 526500
European 545700
Australian 545500
9