Technical Data - Electrolux HOB890FMF User Manual

Problem
and a number come on. There is an error in the
You can hear a constant
beep noise.
10.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the

11. TECHNICAL DATA

11.1 Rating plate
Model HOB890FMF
Typ 62 D4A 03 CA
Induction 7.35 kW
Ser.Nr. .................
ELECTROLUX
11.2 Software Licences
The software included in the hob
contains copyrighted software that is
licensed under the BSD, fontconfig, FTL,
GPL-2.0, LGPL-2.0, LGPL-2.1, libJpeg,
zLib/ libpng, MIT, OpenSSL / SSLEAY
ISC, Apache 2.0 and others.
Possible cause
hob.
The electrical connection is
incorrect.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
PNC 949 596 939 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Germany
7.35 kW
Check the full copy of the licence in:
Menu > Settings > Service > License.
You can download the source code of
the open source software by following
the hyperlink present in the web product
page.
ENGLISH
Remedy
Deactivate the hob and ac‐
tivate it again after 30 sec‐
onds. If comes on
again, disconnect the hob
from the electrical supply.
After 30 seconds, connect
the hob again. If the prob‐
lem continues, speak to an
Authorised Service Centre.
Disconnect the hob from
the electrical supply. Ask a
qualified electrician to
check the installation.
21