Appliance Details - Kettler NEO 6 Assembly, Operation & Maintenance Instructions

Burner built-in gas barbecues with flame safeguard system

Hide thumbs Also See for NEO 6:

Assembly, operation & maintenance instructions (4 pages)

Table Of Contents

Table of Contents

Important Safety Instructions (Electrical)

Important

Read the safety precautions of this booklet carefully before removing the barbecue from its carton or

connecting the barbecue to an electrical supply.

1. Do not immerse any part of the power pack or cables in water. Do not connect or use the lighting system in

the rain.

2. The lighting system should be turned off and disconnected from the main power source whenever it is not in

use, or when changing light globes.

3. Only replace globes with those of equivalent wattage (10W, 12Vac). Using higher rated globes could damage

the globe housing, wiring or power pack. Replacement globes are rated 10W, 12Vac, type G5.3.

4. All electrical cables should be stowed within the barbecue trolley when the barbecue is not in use.

5. The supply cord plug should be removed from the socket-outlet before any cleaning is done.

6. Do not place cord extension sockets or portable power boards where they may be splashed or where

moisture may get in.

7. Check periodically for damage to the supply cord and power pack. Do not use a damaged appliance and

do not attempt to fix any electrical faults. Contact your Service Centre to have any parts replaced with an

equivalent unit.

8. This appliance should be maintained in order to ensure a long, useful life and protect the operator against

electric shocks.

9. A safety switch can enhance electrical safety when using this appliance. If in doubt, speak to a local licensed

tradesperson.