Download Print this page

Kettler NEO 6 Assembly, Operation & Maintenance Instructions

Burner built-in module with sink

Hide thumbs Also See for NEO 6:

Assembly, Operation & Maintenance Instructions

NEO 6 Burner Built-In

Module With Sink

NEO Outdoor Kitchen - For outdoor use only

IMPORTANT

PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.

THIS IS IMPORTANT INFORMATION REGARDING THE

USE AND CARE OF YOUR BARBECUE.

September 2020

Table of Contents

Need help?

Do you have a question about the NEO 6 and is the answer not in the manual?

Page 1 Assembly, Operation & Maintenance Instructions NEO 6 Burner Built-In Module With Sink NEO Outdoor Kitchen - For outdoor use only IMPORTANT PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF YOUR BARBECUE.
Page 2 Natural Gas Conversion & Installation Instruction NG conversions can only be done by an authorised person. Important - For the Consumer & Installer 1. Local Authority Requirements All gas fitting work, service and repairs should only be performed by an authorised person in accordance with UK Gas Safety Regulations 2018.
Page 3 Important - For the Consumer & Installer Once the barbecue has been converted to natural gas, a tether kit must be fixed to the rear panel of the barbecue trolley (this kit is not needed for the built-in models). This must then be connected to a point near or on the gas outlet (bayonet point) at the wall.
Page 4 • Damaged components may endanger your safety or shorten the life of the product. Replace all damaged parts immediately. Use only spare parts manufactured by Kettler. Should you wish to purchase spare parts, they can be ordered directly from: www.kettler.co.uk/shop •...