Fujitsu M1010 Manual page 40

Problem
The external
monitor is blank
or the image is
unstable
The notebook
is not installed
correctly
28
8_AmiloMini_M1010_P27-29_E.indd 28
Possible Cause
The wrong external
monitor has been selected
or the wrong screen
resolution has been set for
the application program.
The battery is not installed
correctly
The battery is dead.
The power adapter is not
connected correctly.
Possible Solution
Terminate the application program in
Windows by pressing
persists after closing the program, switch
over to the notebook's internal LCD screen
with + . Change the following
setting:
Set the screen resolution: Select the
required resolution with Startsymbol –
(Settings) – Control Panel – Appearance and
Personalization – Personalization: Adjust the
screen resolution as required.
Select monitor: Right-click on the desktop.
Under Personalization – Display Settings
Choose monitor 1 or 2 and under Advanced
Settings – Monitor Choose the correct
monitor.
Switch the notebook off.
Check whether the battery is installed
correctly in its compartment.
Switch the notebook on.
Charge the battery.
or
Insert a charged battery.
or
Connect the mains adapter to the notebook.
Switch the notebook off.
Check whether the mains adapter is
connected correctly to the notebook.
Switch the notebook on.
+ . If the fault
9/8/08 1:20:25 PM