Virtual Numeric Keypad - Fujitsu M1010 Manual

Table of Contents

Advertisement

Virtual numeric keypad

To provide the convenience of a numeric
keypad, your keyboard is equipped with a
virtual numeric keypad. The special keys of
the virtual numeric keypad are recognisable by
the numbers and symbols printed in the upper
right corner of each key. If you have switched
on the virtual numeric keypad, you can output
the characters shown on the upper right of the
keys.
1 = Character valid when the Num
2 = Character valid when the Num key
is active key is not active
Further information about the status indicators
can be found in chapter "Status indicators",
Page 5.
Key combinations
The key combinations described below apply
when using Microsoft Windows operating
systems. Some of the following key combinations
may not function in other operating systems and
with some device drivers.
8
4_AmiloMini_M1010_P4-14_EN.indd 8
Illustration
Other key combinations are described in the
relevant manuals supplied with your application
programs.
Key combinations are entered as follows:
Press and hold the first key in the
combination.
While holding the first key down, press the
other key or keys in the combination.
Switching WLAN/
Bluetooth on/off
With the aid of this key
combination you can switch
the WLAN or Bluetooth
functionality
of
your
notebook on and off.
Switching the
loudspeaker on and off
This
key
combination
switches your notebook's
loudspeaker off and on.
Decrease volume
This
key
combination
reduces the volume of the
integrated loudspeakers.
9/8/08 1:21:10 PM

Advertisement

Table of Contents
loading

Table of Contents