Access Via Umts; Changing The Clip-On-Cover; Personalised Clip-On-Cover - Fujitsu M1010 Manual

Table of Contents

Advertisement

Access via UMTS

Your M1010 can connect with the internet via
UMTS. To do this, use one of the following types
of connection:
USB dongle
a USB stick with your mobile phone provider's
SIM card
a mobile end-device (e.g. mobile phone) with
Bluetooth connection
a mobile end-device (e.g. mobile phone) with
data cable
34 mm ExpressCard with UMTS functionality
Changing The Clip-On-
Cover
There are Clip-on-Covers available for your
M1010, in various colours or transparent.
In order to protect the surfaces of your
M1010, change the Clip-on-Cover very
carefully and as seldom as possible.
For further information about buying
the Clip-on-Covers, please refer to the
enclosed leaflet and the Internet under
hk.fujitsu.com/pc
3_AmiloMini_M1010_P1-3_EN.indd 3
Getting To Know Your Notebook
To secue the Clip-on-Cover, place it in on the
notebook and press it on until it is felt to en-
gage.

Personalised Clip-on-Cover

You will need the transparent Clip-on-Cover for
your personalised cover design. Print out your
favourite design in 25 x 14 cm format and slide
it under the cover.
To remove the Clip-on-Cover, lift at both
sides simultaneously and lift it away from the
notebook.
3
9/8/08 1:19:12 PM

Advertisement

Table of Contents
loading

Table of Contents