ABB SafeGear MCC Installation, Operation And Maintenance Manual page 32

S A F E G E A R ® M O T O R C O N T R O L C E N T E R /A R C - R E S I S TA N T M E TA L - C L A D C O N S T R U C T I O N
29
—
03 Notice the Tinnermen
nuts installed along the
frame wall (except in the
part marked "Bolts").
That means, that the
bolts will be screwed
where it is marked "Bolts"
(from the left frame
to the right frame).
Notice the Tinnermen
nuts installed along
the frame wall that is
highlighted in green.
(Except in the part
where says "Bolts"). That
means, that the bolts will
be screwed from the right
frame to the left frame.
—
04 This diagram is for
illustration purposes
only, it may not fully
represent all or any of
the frames you received.
—
05 The picture shows
a side view of the
frame indicating the
holes for each bolt.
—
06 The next picture
shows the location of
the Tinnerman nuts
and where the bolts
will be installed.
The picture shows a
front view of the frames.
If the Low Voltage
compartment is 57 in,
the same rule applies.
View front (left frame)
—
03
—
04
—
05
—
06
Bolts
Tinnerman
nuts
Bolts