ABB SafeGear MCC Installation, Operation And Maintenance Manual page 29

I N S TA L L AT I O N , O P E R AT I O N A N D M A I N T E N A N C E M A N U A L
—
Appendix A Frames Assembly
DANGER
DETAILED DESCRIPTIONS OF STANDARD REPAIR PROCEDURES, SAFETY PRINCIPLES AND SERVICE
OPERATIONS ARE NOT INCLUDED. IT IS IMPORTANT TO NOTE THAT THIS DOCUMENT CONTAINS SOME
WARNINGS AND CAUTIONS AGAINST SOME SPECIFIC SERVICE METHODS WHICH COULD CAUSE PERSONAL
INJURY TO SERVICE PERSONNEL OR COULD DAMAGE EQUIPMENT AND RENDER IT UNSAFE. PLEASE
UNDERSTAND THAT THESE WARNINGS COULD NOT COVER ALL CONCEIVABLE WAYS IN WHICH SERVICE,
WHETHER OR NOT RECOMMENDED BY ABB, MIGHT BE DONE OR OF THE POSSIBLE HAZARDOUS
CONSEQUENCES OF EACH CONCEIVABLE WAY, NOR COULD ABB INVESTIGATE ALL SUCH WAYS. ANYONE
USING SERVICE PROCEDURES OR TOOLS, WHETHER OR NOT RECOMMENDED BY ABB, MUST SATISFY
HIMSELF THOROUGHLY THAT NEITHER PERSONAL SAFETY NOR EQUIPMENT SAFETY WILL BE JEOPARDIZED
BY THE SERVICE METHOD OR TOOLS SELECTED. INFORMATION CONTAINED IN THIS MANUAL IS BASED ON
THE LATEST PRODUCT INFORMATION AVAILABLE AT THE TIME OF PRINTING. THE RIGHT IS RESERVED TO
MAKE CHANGES AT ANY TIME WITHOUT NOTICE.
FAILURE TO FOLLOW THE INSTRUCTIONS AND/OR WARNINGS PROVIDED HEREIN COULD RESULT IN SERIOUS
BODILY INJURY AND/OR DEATH.
CAUTION
DO NOT REMOVE THE GASKET BETWEEN THE ADJOINING FRAMES. IT MUST REMAIN IN PLACE.
26