Summary of Contents for Ingersoll-Rand 2934 Series
Page 1
04584298 Edition 2 April 2008 Air Impact Wrench 2934 and 2940 Series (D Handle) Maintenance Information Save These Instructions...
Page 2
Note: When reading the instructions, refer to exploded diagrams in parts Information Manuals when applicable (see under Related Documentation for form numbers). Lubrication 2. Use Ingersoll Rand No. 10 Oil for lubricating the Motor. Inject Each time a Series 2934 or 2940 Impact Wrench is disassembled for maintenance and repair or replacement of parts, lubricate the tool...
Page 3
7. To remove Cylinder (21) and Front End Plate (22), thread 8. Remove two Air Port Gaskets (26A) and Air Port Gasket four 1/4”– 20 thread socket head cap screws that are at Retainers (27) from Housing. least 3” (75 mm) long into handle end of Housing. Grasping Disassembly of the Handle Housing with installed screws downward, sharply strike heads of Screws on a sturdy table to dislodge Cylinder.
Exhaust Baffle (27C) in Deflector. 8. Position a new Exhaust Gasket (27D) against face of the Motor 1. Coat Hammers (42) with a light film of Ingersoll Rand Impact Housing. Position the assembled Deflector against the Gasket Wrench Grease No.